Magpul Hunter 700L Stock – Remington 700 Long Action - Gray

✨  Magpul Hunter 700L Stock – Remington® 700 Long Action ✨   

Gray

Made from reinforced polymer and an anodized aluminum bedding block, the Hunter 700L Stock – Remington 700 Long Action offers a cost effective upgrade featuring fully adjustable length of pull, comb height, and enhanced ergonomics.

Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution*. The 700L is also M-LOK® compatible to accept a broad range of accessories.

Also compatible with the Magpul Bolt Action Magazine Well 700L, which allows the rifle to be used with detachable AICS-spec box magazines without the need for custom inletting.

Made in the USA.

STRONG BEDDING BLOCK
Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block

DIMPLED DRILL POINTS AND OTHER SLING OPTIONS
Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8" long dome stud)

Push-button QD swivel compatibility in rear with optional Sling Mount Kits

Left and Right rear 1-1/4" Footman's Loops

ENHANCED ERGONOMICS
Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads

60 degree grip angle from bore axis

Tapered Beam design provides good rigidity through forend and will free-float compatible barrels

SPACER SYSTEM FOR CUSTOM LENGTH OF PULL
Adjustable LOP from 13.0"-15.0" with included 0.50" spacers

M-LOK SLOTS FOR ADDITIONAL ACCESSORIES
M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options

OPTIONAL CHEEK RISERS FOR COMB HEIGHT ADJUSTMENT
Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (stock comes pre-fitted with 0.25" Riser)

AICS-SPEC PMAG 5 AC™ L, Standard - AICS Long
Easily upgradeable to removable AICS-spec long action magazines (.30-06 or .300WM pattern) with the affordable Magpul Bolt Action Magazine Well 700L

TECHNICAL SPECIFICATIONS

• Collection: Hunting Stocks and Accessories
• Platform: Remington® 700
• Compatibility: Standard Remington 700 pattern long action rifles (receiver mounting screw center-to-center of 7.375") with stock Remington hinged floorplates*
• Butt-Pad Dimensions: 1.5 x 5.0 in.
• LOP Adjustment Range: ~13.0-15.0 in.
• Weight: 3.2 lbs. without action and bottom metal (with two Spacers installed)
• Width of Butt, max: 1.5 in.
• Width of Forend, max: 2.3 in.

*NOTE: Fits right-hand receivers only.

Accepts ALL factory Remington barrels.

Compatible with aftermarket barrel profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech).

Accepts most factory and aftermarket triggers.

All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well 700L Standard or Magnum. Not compatible with Remington 700 DM models with their proprietary detachable box magazines.

Due to interference with raised Cheek Risers, not compatible with the ISS system (J-Lock bolt) without modification. Regardless of bolt used, all raised Cheek Risers will need to be temporarily detached to remove the bolt for maintenance.

Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700L.

RESOURCES

• MAG483 Hunter 700L Stock – Remington 700 Long Action Installation Instructions
• M-LOK Description and Install